News

BMW F30 | F80 M3 12-16 "CSL-STYLE" Trunk Lid

Posted on December 27, 2015 by Mike Migs

Our BMW F30 | F80 M3 12-16 "CSL-STYLE" Trunk Lid is the first of its kind on the market. There are two things we dislike about the factory trunk lid. 1. the factory trunk is way too heavy and 2. its not aggressive enough for the styling of the car. With this trunk we wanted to pay homage to the CSL but still keep the square profile that matches the car.. All F30 | F80 M3 Trunk lids come pre-drilled so all you have to do it transfer all your factory parts over to the new trunk, only minimal cutting/trimming necessary.

Available in FRP (Fibeglass), Single Sided CF (Outside CF/ Inside FRP), and Double Sided CF (Outside and Inside CF).

Made in the USA.

BMW F30 | F80 M3 12-16 "CSL-STYLE" Trunk Lid trunk features:

* Every Single part is pre-drilled / only minimal trimming may be needed on the customers end.
* Extra Lightweight (Starting @ 10 lbs)
* Made in the USA (California)
* 1x1 and 2x2 CF Weave Available

BMW F80 M3 | F82/83 M4 SRS Coilover Kit

Posted on December 27, 2015 by Status Gruppe

The 2015-16 BMW F80 M3 | F82/83 M4 SGT-SRS coilover features:
* Pillow-ball camber plates (Optional Upgrade)
* Triple bearing design to reduce noise
* 18 way adjustable dampening (combination of rebound and compression)
* Monotube gas charge dampers (Ultra Digressive Valving)
* High strength anodized aluminum alloy and powder coated steel components
* Full length height adjustment with separate settings for damper force and spring pre-tension
* Linear race springs 9kg front / 10kg rear (Cold wound from high tensile chromium silicone wire)
* SGT Adjustable Sway bar endlinks
* SWIFT Race Spring (Optional Upgrade)


BMW F30 / F80 M3 12-16 "High Kick" Carbon fiber Rear Trunk Lid Spoiler now available

Posted on June 11, 2015 by Status Gruppe


Our BMW F30 / F80 M3 Rear Trunk lid spoiler is the perfect blend of OEM and aftermarket styling. With styling ques from the OEM spoiler our "high Kick" Spoiler is very aggressively styled (Over 1" (25.4mm) Taller) while still following the curves of the F30 / 80 M3 without looking out of place. Made using Vacuum infusing technology and sprayed with Automotive UV Clear coat for a lasting appearance. The Spoiler comes with 3M tape pre-installed and ready for install.  Available in FRP (paintable), 1x1 and 2x2 CF weave. Made in the USA.

Available Carbon Weaves Patterns:

 

 

Click on the Link below to order. Status Gruppe BMW F30/80 "High Kick" Trunk Lid spoiler

 


Posted in 1x1, 2x2, BMW, Carbon Fiber, CF, F80, F80M3, high kick, M3, SGT, spoiler, Status Gruppe Tuning, Trunk lid Spoiler, wing

Status Gruppe BMW S55 M3/M4 "Cat-less" Downpipes now available!

Posted on January 06, 2015 by Status Gruppe

Our 2014-15 BMW F80 M3/ F82/3 M4 S55 Down Pipes are made from the same mandrel bent Polished, Fully TIG welded T-304 Stainless Steel with CNC Machined Flanges like all of our Exhaust products and feature our Limited Lifetime warranty. Our S55 Downpipes are 3" dia and then transition into 2.5" dia piping. We have also designed the flanges to float to allow for heat expansion (like the bellows in the OEM Downpipes). Made in the USA

 

The 2014-15 BMW F80 M3/ F82/3 M4 S55 Stainless Steel Down Pipes features:

* 12-16 WHP / 15-19 ft/lb torque Increase (Tune Numbers available soon)

* Made in the USA
 * Limited Lifetime Warranty

 

Click on the Link below to order. Status Gruppe S55 M3/M4 downpipes

 

 

Posted in catless, downpipes, F80, F80M3, F82, F82M4, F83M4, M3, SGT, stainless steel, Status Gruppe Tuning

BMW F80 M3 / F82 M4 /F83 M4 Convertible Carbon Fiber (pre-preg) Rear Diffuser is now available!

Posted on November 25, 2014 by Status Gruppe

We love the look of the OEM Style Rear Diffuser BMW created for the F80 M3/ F82/83 M4, So we made our own version in Pre-Preg Carbon fiber! Best part is our version only weighs .5 Lbs! Perfect for those who want to keep the clean look of the M3/M4, but who still want the race car look of carbon fiber. Direct Fit. No cutting, Drilling, applying Glue, or Tape required. Remove your factory piece and re-install our new piece.

 

Click on the link below to order!

F80 M3/ F82 M4 / F83 M4 Convertible Rear Diffuser

 

Posted in 1x1, 2x2, BMW, Carbon Fiber, CF, Diffuser, F80, F80M3, F82, F82M4, F83M4, M3, pre-preg, SGT, Status Gruppe Tuning

1 2 3 Next »

Recent Articles

Tags